Can you use concrobium in hvac

Removing and controlling mold is one of the messy tasks but some products can effectively get you out of this issue.

Concrobium is one of the best products for this purpose and can be used for various kinds of surfaces such as rooms, machines, laundry areas, closets, kitchen, around windows, doors, etc. As we have been developed to the extent that HVAC systems are now almost in all households, people keep on asking the question, can you use Concrobium in HVAC?

Well, this article will clear all your confusion while answering your questions efficiently.

Does Concrobium mold control work

There is no doubt that Concrobium is one of the best and most effective products when it comes to controlling or removing molds entirely. One of the best things is that there is no ammonia, bleach, or any other harmful chemicals in its composition.

This factor allows house owners to apply it on the surface and let it stay there for a long time. This will kill molds in the first place while preventing them from occurring in the future as well.

As there are no whiting agents in the product, Concrobium will not be able to remove stains caused by the molds.

If you are simply applying Concrobium mold control in the house, this will not take more than an hour or two to dry up completely and start working.

Some people paint over the Concrobium which requires at least 20 to 24 hours of drying time which can be accelerated using fans or opening doors and windows.

Is Concrobium safe to use in HVAC systems

Concrobium is completely pure as it doesn’t include any harmful chemicals or VOCs. This is one of the few reasons that it is highly recommended to be used in HVAC systems. By applying Concrobium, the HVAC system will develop a coating of antimicrobial which will not only kill mold but will efficiently remove fungi and other harmful organisms that can be harmful to humans as well as pets to breathe. 

Is Concrobium safe for humans and pets to breathe

As said earlier, Concrobium itself is completely safe to breathe as it does emit any harmful gases but you should follow precautionary measures while applying it in the HVAC system.

If there is a huge amount of mold or fungi in the unit, it is better to wear a mask while applying the product. As the mold may emit smell or harmful mold spores that can get inside your lungs while inhaling the oxygen.

It is also a good idea to stay away from the surface for some time until the fogging stops entirely or partially from the HVAC units.

Is Concrobium safe if there are plants in the house

Concrobium mold control is not only safe to be used around the plants or greenery but experts claim that some kinds of plants and their species even grow rapidly or efficiently if live in a mold-controlled area.

As it is not yet scientifically proven that Concrobium can help plants grow better, it is better to don’t use it for them but there are no issues if you apply it in the HVAC unit where plants are there as well.

How does mold enter the HVAC system

Air coming out of the vents and air inside the room has fairly different temperatures which cause condensation inside the HVAC unit. Most of the time, the moisture gets dried out when the HVAC unit is switched OFF but if it doesn’t, the moisture can become a cause of mold growth and development in the system.

What kind of mold grows in HVAC systems

Almost all kinds of molds can grow in an HVAC system but below are the list of molds that are widely reported in HVAC units:

  • Ulocladium
  • Trichoderma
  • Stachybotrys
  • Mucor
  • Fusarium
  • Chaetomium
  • Alternaria
  • Aspergillus
  • Acremonium

Suitable temperature to use Concrobium in an HVAC

Moderate room level temperature is considered optimal to use Concrobium in an HVAC. It can be said that any temperature between 10 to 50 degrees celsius is suitable for the Concrobium to work. Do keep the fact in mind that temperature plays an important role as the Concrobium can only get to work if it dries off completely in the unit.

Can Concrobium freeze if used in an air conditioner

Concrobium can definitely freeze in an air conditioner but not because of its cold temperature but if the temperature of the outside environment is also very low.

Experts claim that it can only freeze if your atmosphere is dealing in sub-zero temperature which cannot let any kind of liquid stay in its actual form. If it is frozen in the bottle, you can stir it effectively and use it as there will be no decrease in its efficiency.

How to use mold control Concrobium in an air conditioner

  1. Start by removing any dust, dirt, and debris from the surface where Concrobium will be applied. Also, make sure the surface is dry so that Concrobium can dry in a rapid manner.
  2. Although it is proven that Concrobium has no bleach and it cannot stain any surface, you can test it on a small part of the AC for your own confirmation and satisfaction.
  3. Simply apply the product using a cloth or brush in a way that it can cover all the area evenly and feel like it has been wet properly.
  4. If there are huge spots or mold that have made visible points on the air conditioner’s surface, it is recommended to scrub the area while rubbing it gently with a cloth or a soft brush.
  5. Now remove the excess liquid tipping from the air conditioner’s corner.
  6. Now let the Concrobium dry for a good enough time. Where it usually takes 2 to 4 hours in normal conditions, it is recommended to let the Concrobium get dry and work for at least 16 to 24 hours.
  7. Do keep this fact in mind the Concrobium should be directly applied onto the mold. You should not mix it with water or any other material.

You may also like