Table of Contents
- 1 Aircon condenser frequently asked questions
- 1.1 What is an aircon condenser?
- 1.2 What are the three functions of aircon condenser?
- 1.3 What happens when aircon condenser goes bad?
- 1.4 What causes aircon condenser to fail?
- 1.5 How do I test my aircon condenser?
- 1.6 How long do aircon condenser last?
- 1.7 How to clean my aircon condenser coil?
- 1.8 How do I know if my aircon condenser is clogged?
- 1.9 How can I make my aircon condenser more efficient?
Both aircon condenser and compressor are two vital components of an aircon that other parts in your cooling system depend on. Though the aircon condenser and aircon compressor are located beside each other, they are quite different from in terms of operation.
However, for comprehensive knowledge about their differences, let briefly discuss an aircon mechanism.
- The refrigerant is compressed because of the increase in temperature and decrease in the volume of are refrigerant.
- After the refrigerant is compressed, the refrigerant moves into the aircon condenser where the initial cooling operation starts. This is the primary step in a cooling procedure because this is where the refrigerant (in a gaseous state) is being converted to liquid refrigerant.
- After the conversion, the refrigerant moves over for the filtering process. This is where dust, dirt, and other harmful substance that can pollute the refrigerant are removed.
- After filtering, the refrigerant enters the expansion value where the diminishing of pressure and temperature occurs. Then, the refrigerant moves into the evaporator, where it is cool into a dehumidified state that is available for your home.
- After this operation, the aircon blower helps to distribute the refrigerant to cool your home. Then the cycle starts over and over again.
Furthermore, the first and second step is the main operation that keeps the entire process going. The main difference between aircon condenser and aircon compressor is obvious with their names as an aircon condenser condenses while the aircon compressor compresses. They both operate on the refrigerant, but their roles are incredibly unique.
The compressor helps to squeeze the gas refrigerant by increasing its pressure and reduce its volume. This operation is necessary to get the refrigerant ready for the second steps stated above. The compressor should be considered the paramount preparer as it helps prepare the refrigerant for every operation aimed to make your home cool, ultimately since a refrigerant moves into a compressor as a gas. Therefore, the gas refrigerant is slightly altered by the compressor make it easy for an aircon condenser to change the gas refrigerant into a liquid-vapor.
When it comes to conversion, an aircon condenser is considered an accurate converter. It actually helps to change the refrigerant (in a gaseous state) into liquid all the way around the entire aircon system to produce fresh air. An aircon condenser eventually complements the aircon compressor by converting the pressurized refrigerant to a liquid-vapor before passing through the filtering process and every other cooling operation required to get the refrigerant ready to cool off your home.
Aircon condenser frequently asked questions
What is an aircon condenser?
An aircon condenser is liable for cooling down and condensing the refrigerant vapor into liquid. The considerer is the produce of different parts. When the condenser breaks down it generally means that one or more parts in the condenser will have to be changed.
What are the three functions of aircon condenser?
An aircon condenser function permits high pressure and temperature refrigerant vapor to condense and throw out the heat. There are 3 key types: evaporative, air-cooled, and water-cooled condensers.
What happens when aircon condenser goes bad?
When you have a bad aircon condenser, you may view your A/C system lose its capability to chill the air over time. This noticeable leakage of refrigerant is general and happens from age or damage. Aircon condenser can develop leaks.
What causes aircon condenser to fail?
Electricity power the motors within the condenser that run the fan and the compressor. Malfunctions with the capacitors, electrical relays, or the wiring within the motors can cause these important parts to prevent working and lower or fully prevent the chilling process.
How do I test my aircon condenser?
Leaks within faulty seals and tubs are general reasons for condenser failure. The parts tubes can ruptures, get punctured, or become weak and destroy. The seals can fully damage after intense use. While these components can fall short as the outcome of an impact, they usually fail due to regular, continued to wear.
How long do aircon condenser last?
The lifespan of an aircon condenser is about fifteen to twenty years. Manufactures generally continue to support existing equipment by making replacement parts accessible and honoring maintenance contracts after the fresh standard goes into effect.
How to clean my aircon condenser coil?
Aircon condenser coils are checked and cleaned as required. If the coils are prone to collecting debris and dirt easily, monthly cleaning may be needed. Otherwise, you may need to clean them every 3 months during the chilling season or yearly during regularly scheduled preventive maintenance.
How do I know if my aircon condenser is clogged?
An AC condenser is the part inside an AC unit that is liable for chilling down and condensing inward refrigerant vapor into liquid water. Though considered one part, it is made of different components, such as tubes, fans, motor, circuit board, compressor, and condenser coil. If your air conditioner condenser is about to face breakdown or clogged, you may see one of the big warning signs: Loud and bad noises coming from the unit significantly
- reduced chilling capability from the unitThe unit is leaking a clear amount of fluid
How can I make my aircon condenser more efficient?
Ways to increase air conditioning efficiency:
1. Close doors and windows
2. Plug leaks in your attic, around windows, under doors, etc.
3. Set, or program, your thermostat, and neglect about it.
4. Increase airflow around your air condenser
5. Shade your condenser
6. Keep up with filter changes
7. If you want specialized control for each room in your home
8. Do not use registers for temperature control
9. Set your thermostat at the best temperature
10. Keep up with annually spring preventative maintenance